Home > Tools > Polishing Fixtures

Tools

Polishing Fixtures

AccuLap™ Polishing Fixture 2.5mm
AMPT-010

The AccuLap™ fiber optic polishing tool will polish most 2.5mm ferruled connectors including ST, SC, and FC connectors. Because the AccuLap™ fiber optic polishing tool is made of hardened tungsten, it will not grind away during polishing. Plastic and stainless steel fixtures leave actual fixture material on the polishing surface that can contaminate the connector and fiber end-face increasing dB loss. Keeping fixture material off of polishing films will allow you to use 5 to 10 times less polishing paper. The center hole diameter is held to 2 ten-thousandths of an inch.


Universal 2.5mm Plastic Polishing Tool
ACP1000

This inexpensive plastic polishing fixture will polish most 2.5mm ferruled connectors.


Polishing Tool / Ceramic Termini
AMPTCT-010

The two part Ceramic Termini Polishing Tool will accurately polish the M29504 pin and socket. For use in multimode or singlemode applications.


Polishing Tool / Ceramic Termini
ACPT-015

Cleaner than conventional polishing fixtures with double the lifetime of plastic fixtures. Will polish LC connectors.


Polishing Tool / Ceramic Termini
ACPT-010

Cleaner than conventional polishing fixtures with double the lifetime of plastic fixtures. Will polish ST, SC, FC and most 2.5mm ferrules.

Catalogs & Literature  |  Data/Installation/MSDS Info  |  News  |  Articles


American Fiber Optic Technologies, a Norfolk Wire & Electronics Company.

5301 Cleveland Street Virginia Beach, VA 23462
tel: (757) 559-1826  |  fax: (757) 631-0593  |  sales@americanfo.com